You only need one company for your project
... we cover ALL areas.
Demolition and Concrete Cutting. All Aspects. No Sub Hiring Necessary.

Main Menu

Contact Us

Phone

02 6654 9417

Fax 6654 9419
Kevin 0447 662 787

Services

Attention: open in a new window. PDFPrintE-mail

At All Areas Demolition we use the "one-stop-shop" strategy, providing all aspects of the demolition work. Save some time, hire Aademex and be sure that we cover all apsects of the project.

And when we say "All Areas" we mean it. No matter, where you need us, whether it is in Australia or overseas, we can take on the project.

Services provided are:

Structural Demolition (Lic No 205562DE2)

No job is too complex for us and we provide appropriate planning, supervision, staff and equipment and public protection. Dust emissions and noise levels are effectively controlled through our modern equipment and work methods and we take care that every step of the project is monitored closely to provide the highest level of safety and least disruption to surrounding work places and road traffic.

Tipper Hire & Material Removal

And of course we can provide a tipper truck to remove all the material from the demolition or excavation site.

Asbestos Removal (Lic No 205562AS2)

Safety precautions must be taken whenever dust could be generated from asbestos containing materials so the removal of such building materials should be done by professional and licensed business only. Significant health risks can exist if asbestos is not properly handled.

Bobcat, Excavator, Hydraulic Breaker

Essential machines for any demolition and excavation project. We have two excavators, 5tonnes and 25 tonnes that can be utilised for our projects. Specially equipped with a full overhead protective structure and craning valves fitted, they already meet the safety requirements of 2010. Craning valves stop loads from being dropped in the unlikely case of the hydraulics to fail during work.

Concrete Cutting

We provide all aspects of concrete cutting using a wide range of equipment like our road saw, wire saw, wall saw or ring saw depending on the size and nature of the project.

Core Drilling

Run by electricity, air or hydraulics, these drills can cut precise, circular holes with a diameter of up to 1.2 metres. These machines can be used horizontally, vertically or the stand can be set at angles to suit any requirement you may have.

Concrete Remediation

Some projects require the damaging or destruction of existing surfaces. We take care that those surfaces will be repaired or completely renewed and properly rendered as part of our job.